Thank you to everyone who attended our meeting. <br><br>Blair has been making impressive work on the reprap. It is now printing recognisable objects. We made a lot of progress on finding the materials for the community reprap.<br>
<br>One thing that I thought after the meeting is would there be interest in collecting some tutorial introduction to the arduino? I am  thinking some prints with circuit diagrams and code. <br><br>Thank<br><br>Kieran<br>
<br><div class="gmail_quote">On 23 October 2011 23:21, Blair Thompson <span dir="ltr"><<a href="mailto:mail@justblair.co.uk">mail@justblair.co.uk</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
Yes, by some black magic that I fail to understand.  The voltages involved<br>
are actually higher... 12v.  I have actually gone higher, I'm running my<br>
printer at 14v now, that's as high as the power supply I have goes.  I have<br>
a 24v one in the cupboard, I am thinking about going to that voltage.  Still<br>
trying to work out if and what I will damage doing it!!<br>
<div class="im"><br>
<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a><br>
[mailto:<a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a>] On Behalf Of Kieran Wyse<br>
</div>Sent: 23 October 2011 23:18<br>
<div class="im">To: Discussion list for the Electron Club<br>
Subject: Re: [ELECTRON] Proposed new club + Arduino meet up<br>
<br>
</div><div><div></div><div class="h5">ok that is what ill get.<br>
<br>
This is probably a dumb question but this ones voltage is 2.8 volts, the<br>
arduino is 5 - 9 volts. Do the motor drivers deal with this for us?<br>
<br>
<br>
Kieran.<br>
<br>
On 23 October 2011 23:03, Blair Thompson <<a href="mailto:mail@justblair.co.uk">mail@justblair.co.uk</a>> wrote:<br>
<br>
> <a href="http://www.zappautomation.co.uk/product_info.php?cPath=9_43&products_i" target="_blank">http://www.zappautomation.co.uk/product_info.php?cPath=9_43&products_i</a><br>
> d=29<br>
><br>
> Look at the holding torque... You want as much as possible in the nema<br>
> 17 form factor.  Its more for the extruder, but better to buy all the<br>
> motors the same.  Price wise its not much difference<br>
><br>
> The link above is what I am using in mine... No probs<br>
><br>
> Trying to print some parts as we speak.  Already made some idlers for<br>
> the X and y axis.  I am updating the GOSHG site as I go...<br>
><br>
> Blair<br>
><br>
> -----Original Message-----<br>
> From: <a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a><br>
> [mailto:<a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a>] On Behalf Of Kieran Wyse<br>
> Sent: 23 October 2011 22:41<br>
> To: Discussion list for the Electron Club<br>
> Subject: Re: [ELECTRON] Proposed new club + Arduino meet up<br>
><br>
> Ok, I am defeated.<br>
><br>
> I have found a few motors,<br>
><br>
><br>
> Think this one is not good enough?<br>
><br>
><br>
> <a href="http://www.ebay.co.uk/itm/5-x-NEMA-17-Stepper-Motor-ETS535-0-9-deg-4-2" target="_blank">http://www.ebay.co.uk/itm/5-x-NEMA-17-Stepper-Motor-ETS535-0-9-deg-4-2</a><br>
> V-/180<br>
> 740649234?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item2a14fb7<br>
> 112<br>
><br>
> I think this one will do, it does seem like over kill.<br>
><br>
> <a href="http://www.zappautomation.co.uk/product_info.php?cPath=9_43&products_i" target="_blank">http://www.zappautomation.co.uk/product_info.php?cPath=9_43&products_i</a><br>
> d=52<br>
><br>
><br>
> Or we could get the whole kit.<br>
><br>
><br>
> <a href="https://xyzprinters.com/electronics/136-prusa-all-you-need-electronics" target="_blank">https://xyzprinters.com/electronics/136-prusa-all-you-need-electronics</a><br>
> -kit.h<br>
> tml<br>
><br>
> seems like a good deal? By the time we have bought all the bits?<br>
><br>
> What do people think.<br>
><br>
> p.s. we have another meet up this Thursday.<br>
><br>
> thanks<br>
><br>
> kieran<br>
><br>
><br>
> On 18 October 2011 19:28, Roy Mohan Shearer <<a href="mailto:fy81le@googlemail.com">fy81le@googlemail.com</a>> wrote:<br>
><br>
> > Yeah, you can put me down as providing a couple, will see how<br>
> > rapidly I can do them!<br>
> > Roy<br>
> ><br>
> > On 16 October 2011 19:51, Kieran Wyse <<a href="mailto:kieranwyse@gmail.com">kieranwyse@gmail.com</a>> wrote:<br>
> ><br>
> > > Hi Roy,<br>
> > ><br>
> > > That would be great if you could get hold of the parts. I don't<br>
> > > think it matters which printer they are printed on. I'll put you<br>
> > > on the list as provisionally providing the parts if that is ok.<br>
> > ><br>
> > > Thanks<br>
> > ><br>
> > > Kieran.<br>
> > ><br>
> > ><br>
> > > On 13 October 2011 21:40, Roy Mohan Shearer<br>
> > > <<a href="mailto:fy81le@googlemail.com">fy81le@googlemail.com</a>><br>
> > wrote:<br>
> > ><br>
> > >> Great stuff Kieran, looks good! I shall endeavour to make it<br>
> > >> along to either of the coming meetups.<br>
> > >> I could print off a couple via my friend Mike who has a Makerbot<br>
> > >> if that is any help, but don't want to duplicate.. Does it matter<br>
> > >> if parts come<br>
> > from<br>
> > >> different printers do you think?<br>
> > >>  Roy<br>
> > >><br>
> > >><br>
> > >><br>
> > >> On 13 October 2011 21:26, Kieran Wyse <<a href="mailto:kieranwyse@gmail.com">kieranwyse@gmail.com</a>> wrote:<br>
> > >><br>
> > >>> Thanks all for coming to the Glasgow Open Source Hardware Group<br>
> > meeting.<br>
> > >>><br>
> > >>> It was good to see you all.<br>
> > >>><br>
> > >>> Anyway here is the website <a href="http://goshg.org.uk" target="_blank">http://goshg.org.uk</a>.<br>
> > >>><br>
> > >>><br>
> > >>> There is a list of the hardware that we will need under the<br>
> > >>> reprap project<br>
> > >>><br>
> > >>><br>
> > >>>  Feel free to add and edit and one wanting administrator<br>
> > >>> privileges let me know.<br>
> > >>><br>
> > >>><br>
> > >>>  I have also add a list of parts for the reprap. If anyone has<br>
> > >>> some things they are willing to give ......<br>
> > >>><br>
> > >>><br>
> > >>> Thanks<br>
> > >>><br>
> > >>> kieran.<br>
> > >>><br>
> > >>><br>
> > >>><br>
> > >>><br>
> > >>> On 1 October 2011 11:51, Kieran Wyse <<a href="mailto:kieranwyse@gmail.com">kieranwyse@gmail.com</a>> wrote:<br>
> > >>><br>
> > >>>> Thanks for this , posted a message on the events part of the<br>
> > >>>> arduino forum.<br>
> > >>>><br>
> > >>>> It sounds like you are making good progress.<br>
> > >>>><br>
> > >>>> Thanks<br>
> > >>>><br>
> > >>>> Kieran<br>
> > >>>><br>
> > >>>><br>
> > >>>> On 1 October 2011 08:27, Blair Thompson <<a href="mailto:mail@justblair.co.uk">mail@justblair.co.uk</a>><br>
> wrote:<br>
> > >>>><br>
> > >>>>> The official Arduino forum has a couple of places that are<br>
> > relevant..*<br>
> > >>>>> ***<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>><br>
> > >>>>><br>
> > <a href="http://arduino.cc/forum/index.php?PHPSESSID=32bdfb4b9ec69eecf25541f9" target="_blank">http://arduino.cc/forum/index.php?PHPSESSID=32bdfb4b9ec69eecf25541f9</a><br>
> > b8<br>
> > a88f7e&board=27.0<br>
> > >>>>> ****<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> for announcing workshops..****<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> <a href="http://arduino.cc/forum/index.php/board,28.0.html****" target="_blank">http://arduino.cc/forum/index.php/board,28.0.html****</a><br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> for talking about local groups.****<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> Regards ****<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> Blair****<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> Ps last night I 3D printed my first half decent prints.  Still<br>
> > >>>>> got<br>
> > some<br>
> > >>>>> fine tuning to do, but getting there.****<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> *From:* <a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a> [mailto:<br>
> > >>>>> <a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a>] *On Behalf Of *Kieran Wyse<br>
> > >>>>> *Sent:* 30 September 2011 23:04<br>
> > >>>>><br>
> > >>>>> *To:* Discussion list for the Electron Club<br>
> > >>>>> *Subject:* Re: [ELECTRON] Proposed new club + Arduino meet<br>
> > >>>>> up****<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> Hi Blair,<br>
> > >>>>><br>
> > >>>>><br>
> > >>>>> you mention that we could post on an arduino forum. Can you<br>
> > >>>>> remember which one?<br>
> > >>>>><br>
> > >>>>> Thanks<br>
> > >>>>><br>
> > >>>>> Kieran.****<br>
> > >>>>><br>
> > >>>>> On 30 September 2011 19:31, Kieran Wyse <<a href="mailto:kieranwyse@gmail.com">kieranwyse@gmail.com</a>><br>
> > wrote:*<br>
> > >>>>> ***<br>
> > >>>>><br>
> > >>>>> Hi Blair,<br>
> > >>>>><br>
> > >>>>> Well done on getting your printer to print.<br>
> > >>>>><br>
> > >>>>> I unfortunately don't think I'll be able to get to the<br>
> > >>>>> electron club before the next meet up to scavenge. If they are<br>
> > >>>>> still there by next Thursday then I'll start with a screw driver.<br>
> > >>>>><br>
> > >>>>><br>
> > >>>>> As to modifying the calendar<br>
> > >>>>><br>
> > >>>>> The username and password for the electron club calendar is<br>
> > >>>>><br>
> > >>>>>   'electronclub' and the password 'clubcal', and click the 'Login'<br>
> > >>>>> button.<br>
> > >>>>><br>
> > >>>>> The full how to is<br>
> > >>>>><br>
> > >>>>> <a href="http://www.electronclub.org/doku.php?id=howto:calendar" target="_blank">http://www.electronclub.org/doku.php?id=howto:calendar</a><br>
> > >>>>><br>
> > >>>>> Hope this helps<br>
> > >>>>><br>
> > >>>>> Kieran<br>
> > >>>>><br>
> > >>>>> ****<br>
> > >>>>><br>
> > >>>>> On 26 September 2011 23:37, Blair Thompson<br>
> > >>>>> <<a href="mailto:mail@justblair.co.uk">mail@justblair.co.uk</a>><br>
> > >>>>> wrote:****<br>
> > >>>>><br>
> > >>>>> Hi Kieran****<br>
> > >>>>><br>
> > >>>>>  ****<br>
> > >>>>><br>
> > >>>>> In terms of the Meeting dates, my diary is free for now FWIW,<br>
> > >>>>> sounds<br>
> > >>>>> good.****<br>
> > >>>>><br>
> > >>>>>  ****<br>
> > >>>>><br>
> > >>>>> GOSG sounds fine to me.  If the domain is cheap enough then go<br>
> > >>>>> for<br>
> > it,<br>
> > >>>>> If I can help on the website stuff give me a shout.****<br>
> > >>>>><br>
> > >>>>>  ****<br>
> > >>>>><br>
> > >>>>> Reprap wise.  I am happy to contribute in plastic (that's<br>
> > >>>>> thermo-plastic) if I can get coax the current love of my life<br>
> > >>>>> into<br>
> > working.<br>
> > >>>>> Had a slight hot end melty melty problem!  Waiting for parts.<br>
> > >>>>> I did<br>
> > print a<br>
> > >>>>> rather fetching plastic moustache!<br>
> > >>>>><br>
> > >>>>> For your component list..  I can help with a list of receipts<br>
> > >>>>> to whoever is wishing to do the collating.****<br>
> > >>>>><br>
> > >>>>> Top tips though.****<br>
> > >>>>><br>
> > >>>>> Don't let those old PCs get chucked out from the corner till<br>
> > >>>>> you have robbed them of their power supplies.  Clip off the<br>
> > >>>>> molex plugs that<br>
> > the<br>
> > >>>>> boards connect to as well.  In fact if someone can also<br>
> > >>>>> harvest the<br>
> > power<br>
> > >>>>> connectors on the motherboards as well that will be useful.<br>
> > >>>>> ****<br>
> > >>>>><br>
> > >>>>> Someone also suggested that they had a modest collection of<br>
> > >>>>> 8mm threaded rod.  If we pull together that as well I think we<br>
> > >>>>> could<br>
> > cobble<br>
> > >>>>> together a lot of the printer without paying out hard<br>
> > >>>>> cash.****<br>
> > >>>>><br>
> > >>>>> Same could be said for the electronics.  I am sure.  I may<br>
> > >>>>> have suitable mosfets for heaters etc.  Though stepper motor<br>
> > >>>>> drivers may<br>
> > be<br>
> > >>>>> easier to just buy.  I do have plenty of .1' female pcb<br>
> > >>>>> connectors<br>
> > and some<br>
> > >>>>> strip board (though printing pcb is within the skill set of<br>
> > >>>>> several<br>
> > of us)<br>
> > >>>>> ****<br>
> > >>>>><br>
> > >>>>> For a community device I think we should be aiming for cheap<br>
> > >>>>> as we can.  Those that want to create their own from the first<br>
> > >>>>> can then<br>
> > spend as<br>
> > >>>>> little or as much as they feel it is worth to them.****<br>
> > >>>>><br>
> > >>>>> Good luck on the sponsorship front, but I think if we aim to<br>
> > >>>>> scavenge rather than look for hard cash we can keep the costs<br>
> > >>>>> down.  I reckon<br>
> > we will<br>
> > >>>>> probably need to buy the stepper motors unless we get really<br>
> > >>>>> lucky on<br>
> > the<br>
> > >>>>> scavenging front.****<br>
> > >>>>><br>
> > >>>>>  ****<br>
> > >>>>><br>
> > >>>>> Regards****<br>
> > >>>>><br>
> > >>>>>  ****<br>
> > >>>>><br>
> > >>>>> Blair****<br>
> > >>>>><br>
> > >>>>>  ****<br>
> > >>>>><br>
> > >>>>> PS my first attempt at sending this mail hit a moderator approval.<br>
> > >>>>> Sorry if you all get spammed with a double post****<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> _______________________________________________<br>
> > >>>>> members mailing list<br>
> > >>>>> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> > >>>>> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
> > >>>>><br>
> > >>>>> Instructions for changing your mailing list settings:<br>
> > >>>>> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
> > >>>>><br>
> > >>>>> Archive for this list:<br>
> > >>>>> <a href="http://lists.electronclub.org/pipermail/members/****" target="_blank">http://lists.electronclub.org/pipermail/members/****</a><br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> ** **<br>
> > >>>>><br>
> > >>>>> _______________________________________________<br>
> > >>>>> members mailing list<br>
> > >>>>> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> > >>>>> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
> > >>>>><br>
> > >>>>> Instructions for changing your mailing list settings:<br>
> > >>>>> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
> > >>>>><br>
> > >>>>> Archive for this list:<br>
> > >>>>> <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
> > >>>>><br>
> > >>>>><br>
> > >>>><br>
> > >>><br>
> > >>> _______________________________________________<br>
> > >>> members mailing list<br>
> > >>> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> > >>> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
> > >>><br>
> > >>> Instructions for changing your mailing list settings:<br>
> > >>> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
> > >>><br>
> > >>> Archive for this list:<br>
> > >>> <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
> > >>><br>
> > >>><br>
> > >><br>
> > >> _______________________________________________<br>
> > >> members mailing list<br>
> > >> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> > >> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
> > >><br>
> > >> Instructions for changing your mailing list settings:<br>
> > >> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
> > >><br>
> > >> Archive for this list:<br>
> > >> <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
> > >><br>
> > >><br>
> > ><br>
> > > _______________________________________________<br>
> > > members mailing list<br>
> > > <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> > > <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
> > ><br>
> > > Instructions for changing your mailing list settings:<br>
> > > <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
> > ><br>
> > > Archive for this list:<br>
> > > <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
> > ><br>
> > ><br>
> > -------------- next part -------------- An HTML attachment was<br>
> > scrubbed...<br>
> > URL: <<br>
> > <a href="http://lists.electronclub.org/pipermail/members/attachments/20111018" target="_blank">http://lists.electronclub.org/pipermail/members/attachments/20111018</a><br>
> > /b<br>
> > 6a077eb/attachment.htm<br>
> > ><br>
> > _______________________________________________<br>
> > members mailing list<br>
> > <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> > <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
> ><br>
> > Instructions for changing your mailing list settings:<br>
> > <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
> ><br>
> > Archive for this list:<br>
> > <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
> ><br>
> -------------- next part -------------- An HTML attachment was<br>
> scrubbed...<br>
> URL:<br>
> <<br>
> <a href="http://lists.electronclub.org/pipermail/members/attachments/20111023/1" target="_blank">http://lists.electronclub.org/pipermail/members/attachments/20111023/1</a><br>
> de28c<br>
> 68/attachment.htm><br>
> _______________________________________________<br>
> members mailing list<br>
> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
><br>
> Instructions for changing your mailing list settings:<br>
> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
><br>
> Archive for this list:<br>
> <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
><br>
><br>
> _______________________________________________<br>
> members mailing list<br>
> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
><br>
> Instructions for changing your mailing list settings:<br>
> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
><br>
> Archive for this list:<br>
> <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL:<br>
</div></div><<a href="http://lists.electronclub.org/pipermail/members/attachments/20111023/bac89a%0Ac2/attachment.htm" target="_blank">http://lists.electronclub.org/pipermail/members/attachments/20111023/bac89a<br>
c2/attachment.htm</a>><br>
<div><div></div><div class="h5">_______________________________________________<br>
members mailing list<br>
<a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
<a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
<br>
Instructions for changing your mailing list settings:<br>
<a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
<br>
Archive for this list:<br>
<a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
<br>
<br>
_______________________________________________<br>
members mailing list<br>
<a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
<a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
<br>
Instructions for changing your mailing list settings:<br>
<a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
<br>
Archive for this list:<br>
<a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
</div></div></blockquote></div><br>