Looking at the options for the electronics, I'm not really sure what path to go down.  Blair, I know you're a fan of the RAMPS boards, what about if I make a RAMPS 1.4 board? What are peoples opinions on the best board for me to go ahead and make?<div>
<br></div><div>Tom</div><div><br><div><div class="gmail_quote">On Tue, Nov 8, 2011 at 10:48 PM, Blair Thompson <span dir="ltr"><<a href="mailto:mail@justblair.co.uk">mail@justblair.co.uk</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
As I said in my ps.  I have just received a bundle of nuts and bolts, which<br>
should cover the needs in that department.  I have marked them as on order<br>
on the RepRap page at goshg.  I should change that to yes when I get a<br>
chance.<br>
<br>
I have also been working on some ABS prints for the printer as well.  I am<br>
still refining the hole sizes for the bar clamps.  What I have made so far<br>
is probably useable, but I would be happier if I can get the tolerances down<br>
a little before attempting more critical prints.<br>
<br>
I have been using parts from Greg Frost's repository for this as he has a<br>
more robust looking Y bracket.  I will probably use one of the close but no<br>
cigar prints to upgrade my own printer.<br>
<br>
As for changing nozzles on the fly?  The hot end is bolted into the extruder<br>
(if using a Wades which is the current fashion) with two 3mm bolts.<br>
Changing the nozzles over is probably going to damage the hot end if done<br>
frequently, but changing hot ends is certainly possible if fiddly.  If it<br>
were me I would be tempted to carry two extruder/x-carriage/extruder<br>
motor/hot-end combos for an easy swap over.  Use a durable connector to make<br>
the electronics easy to swap and Bob is indeed your mammies sister's ball<br>
and chain.<br>
<br>
For what we are hoping to do, sticking with the standard sizes would make<br>
calibration that bit easier especially if we use the<br>
Pronterface/Sfact/marlin firmware options.  You can get pretty good prints<br>
after a pretty simple calibration routine.   It's only when you are trying<br>
to make mechanical parts that you need more precision.<br>
<br>
Blair<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a><br>
[mailto:<a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a>] On Behalf Of Kieran Wyse<br>
Sent: 08 November 2011 22:29<br>
<div class="HOEnZb"><div class="h5">To: Discussion list for the Electron Club<br>
Subject: Re: [ELECTRON] Proposed new club + Arduino meet up<br>
<br>
Once the reprap is built we can certainly thing about enclosing it, it may<br>
well improve build quality. As to the fidelity it does seem just from visual<br>
inspection of the parts printed that the limiting factor seems to be the<br>
size of the nozzle. Which begs the question is there are any way to change<br>
the nozzle size on the fly? If it were possible and I do not know how I<br>
think it would likely turn the reprap into a VERY capable machine.<br>
<br>
I have been told that the motors are going to take another 11 days to<br>
arrive. They should be here by the end of the month i reckon. Has anyone<br>
else had more progress than myself?<br>
<br>
Kieran.<br>
<br>
On 8 November 2011 21:56, Blair Thompson <<a href="mailto:mail@justblair.co.uk">mail@justblair.co.uk</a>> wrote:<br>
<br>
> I have seen other reprap experimenters talking about using enclosures.<br>
> I for the life of me cant remember whom.  What I do seem to recall was<br>
> that they were using the heated bed as the main heating source for the<br>
> enclosure and then using a temperature controlled fan to maintain the<br>
> ambient temperature inside the case.  I seem to remember a temperature<br>
> of around 40c as being in the ballpark as to what was useful.<br>
><br>
> If I remember quickly, what the experimenters were trying to achieve<br>
> was reduction of distortion in taller models.  Warping occurs<br>
> sometimes when parts of the model at the base cool while those at the<br>
> top i.e. the most recently printed are stil hot.  An enclosure serves<br>
> to reduce the difference in temperature from the most recently printed<br>
> parts of the model to the least recently printed.<br>
><br>
> I have been trying to perfect my machine and have found that fan<br>
> cooling of the filament as it is laid down makes a difference to the<br>
> quality of the prints in either ABS and PLA.  For ABS however I also<br>
> have to lay a skirt which reduces the cooling at the bottom of the<br>
> model from either my cooling fan or from the movement of the Y axis.<br>
> I was getting lifts from the build plate before I started using the<br>
> skirt.  I don't know if this will improve PLA prints as I have not<br>
> tried it yet, Imanaged to get good prints without it.<br>
><br>
> The layer thickness you reference for the Reprap of 0.3mm depends on<br>
> the extrusion nozzle aperture width.  With a 0.5mm width and 3mm<br>
> filament the layer thickness works out at about 0.4mm using the sfact<br>
> software as a slicer.  You can get lower by using different filament<br>
> thickness and different nozzle aperture widths.  What you gain in<br>
> fidelity you lose in build speeds though.<br>
><br>
> One idea I had was to not build the reprap using triangular vertexes,<br>
> but rather to build an MDF cube but use the Prusa dimensions and<br>
> mechanical parts.  This would certainly allow experimentation in terms<br>
> of retaining some ambient heat around the models being created.<br>
><br>
> Regards<br>
><br>
> Blair.<br>
><br>
> Ps  I just got a delivery of various screws and bolts that I needed.<br>
> I of course ordered a few extras.  All but the M8 washers arrived today.<br>
><br>
><br>
><br>
> -----Original Message-----<br>
> From: <a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a><br>
> [mailto:<a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a>] On Behalf Of Brian Loudon<br>
> Sent: 08 November 2011 21:29<br>
> To: Discussion list for the Electron Club<br>
> Subject: Re: [ELECTRON] Proposed new club + Arduino meet up<br>
><br>
> Hi to those interested in RepRaps, I came across this patent relating<br>
> to temperature and flow control for professional Fused Deposition<br>
> Modelling systems ;<br>
><br>
><br>
> <a href="http://www.google.co.uk/patents?hl=en&lr=&vid=USPAT5866058&id=OgUXAAAA" target="_blank">http://www.google.co.uk/patents?hl=en&lr=&vid=USPAT5866058&id=OgUXAAAA</a><br>
> EBAJ&o<br>
><br>
> i=fnd&dq=stratasys+patent+fused+deposition+modelling&printsec=abstract<br>
> #v=one<br>
> page&q&f=false<<a href="http://www.google.co.uk/patents?hl=en&lr=&vid=USPAT5866" target="_blank">http://www.google.co.uk/patents?hl=en&lr=&vid=USPAT5866</a><br>
> 058&id=OgUXAAAAEBAJ&o%0Ai=fnd&dq=stratasys+patent+fused+deposition+mod<br>
> elling&printsec=abstract#v=one%0Apage&q&f=false><br>
><br>
> The stratasys Dimension printers achieve .178 mm, .254 mm or .33 mm<br>
> layer thicknesses,<br>
><br>
> <a href="http://www.dimensionprinting.com/3d-printers/3d-printing-comparison_ch" target="_blank">http://www.dimensionprinting.com/3d-printers/3d-printing-comparison_ch</a><br>
> <a href="http://art.as" target="_blank">art.as</a><br>
> px<br>
><br>
> the reprap is quoted as a layer thickness of 0.3<br>
> <a href="http://reprap.org/wiki/Mendel" target="_blank">http://reprap.org/wiki/Mendel</a><br>
><br>
> The patent above emphasises the importance of temperature and the<br>
> professional machines all have enclosures, makes me wonder if the<br>
> reprap performance can be optimized?<br>
><br>
> cheers<br>
><br>
> Brian<br>
><br>
><br>
><br>
> _______________________________________________<br>
> members mailing list<br>
> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
><br>
> Instructions for changing your mailing list settings:<br>
> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
><br>
> Archive for this list:<br>
> <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
><br>
><br>
> _______________________________________________<br>
> members mailing list<br>
> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
><br>
> Instructions for changing your mailing list settings:<br>
> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
><br>
> Archive for this list:<br>
> <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL:<br>
<<a href="http://lists.electronclub.org/pipermail/members/attachments/20111108/d4d08a
ec/attachment.htm" target="_blank">http://lists.electronclub.org/pipermail/members/attachments/20111108/d4d08a<br>
ec/attachment.htm</a>><br>
_______________________________________________<br>
members mailing list<br>
<a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
<a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
<br>
Instructions for changing your mailing list settings:<br>
<a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
<br>
Archive for this list:<br>
<a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
<br>
<br>
_______________________________________________<br>
members mailing list<br>
<a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
<a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
<br>
Instructions for changing your mailing list settings:<br>
<a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
<br>
Archive for this list:<br>
<a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
</div></div></blockquote></div><br></div></div>