Ramps does have a natural advantage that one of us is familiar with it and it seems like a well respected choice so I'll just go ahead with them.<div><br></div><div>The more surface mount components the better from my perspective as it make the board production easier, less holes to drill, and the components are usually cheaper.</div>
<div><br></div><div>I will keep you guys updated with my progress and will hopefully have something to bring to the meeting next week.</div><div><br></div><div>Tom<br><br><div class="gmail_quote">On Wed, Nov 9, 2011 at 10:36 PM, Blair Thompson <span dir="ltr"><<a href="mailto:mail@justblair.co.uk">mail@justblair.co.uk</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">Hi Tom<br>
<br>
I can't say that I am totally a ramps fanboy.  I favour it for a couple of<br>
reasons though...<br>
<br>
1.  I know it (yep that is the main reason)<br>
2.  SD support<br>
3.  Good support from the firmware point of view.  (ie Marlin, Sprinter,<br>
etc.)<br>
<br>
There are others though and some may be easier to manufacture.  Sanguinololu<br>
I believe can be made to operate from SD.  I would have to check to see what<br>
firmwares it can support.<br>
<br>
As for ramps 1.4  If you enjoy working on surface mount stuff this is one<br>
route to go.  Ramps 1.3 is through hole and has as far as I can tell all the<br>
relevant features...<br>
<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a><br>
[mailto:<a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a>] On Behalf Of Thomas Parry<br>
Sent: 09 November 2011 20:26<br>
<div><div class="h5">To: Discussion list for the Electron Club<br>
Subject: Re: [ELECTRON] Proposed new club + Arduino meet up<br>
<br>
Looking at the options for the electronics, I'm not really sure what path to<br>
go down.  Blair, I know you're a fan of the RAMPS boards, what about if I<br>
make a RAMPS 1.4 board? What are peoples opinions on the best board for me<br>
to go ahead and make?<br>
<br>
Tom<br>
<br>
On Tue, Nov 8, 2011 at 10:48 PM, Blair Thompson <<a href="mailto:mail@justblair.co.uk">mail@justblair.co.uk</a>>wrote:<br>
<br>
> As I said in my ps.  I have just received a bundle of nuts and bolts,<br>
> which should cover the needs in that department.  I have marked them<br>
> as on order on the RepRap page at goshg.  I should change that to yes<br>
> when I get a chance.<br>
><br>
> I have also been working on some ABS prints for the printer as well.<br>
> I am still refining the hole sizes for the bar clamps.  What I have<br>
> made so far is probably useable, but I would be happier if I can get<br>
> the tolerances down a little before attempting more critical prints.<br>
><br>
> I have been using parts from Greg Frost's repository for this as he<br>
> has a more robust looking Y bracket.  I will probably use one of the<br>
> close but no cigar prints to upgrade my own printer.<br>
><br>
> As for changing nozzles on the fly?  The hot end is bolted into the<br>
> extruder (if using a Wades which is the current fashion) with two 3mm<br>
> bolts.<br>
> Changing the nozzles over is probably going to damage the hot end if<br>
> done frequently, but changing hot ends is certainly possible if<br>
> fiddly.  If it were me I would be tempted to carry two<br>
> extruder/x-carriage/extruder motor/hot-end combos for an easy swap<br>
> over.  Use a durable connector to make the electronics easy to swap<br>
> and Bob is indeed your mammies sister's ball and chain.<br>
><br>
> For what we are hoping to do, sticking with the standard sizes would<br>
> make calibration that bit easier especially if we use the<br>
> Pronterface/Sfact/marlin firmware options.  You can get pretty good prints<br>
> after a pretty simple calibration routine.   It's only when you are trying<br>
> to make mechanical parts that you need more precision.<br>
><br>
> Blair<br>
><br>
> -----Original Message-----<br>
> From: <a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a><br>
> [mailto:<a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a>] On Behalf Of Kieran Wyse<br>
> Sent: 08 November 2011 22:29<br>
> To: Discussion list for the Electron Club<br>
> Subject: Re: [ELECTRON] Proposed new club + Arduino meet up<br>
><br>
> Once the reprap is built we can certainly thing about enclosing it, it<br>
> may well improve build quality. As to the fidelity it does seem just<br>
> from visual inspection of the parts printed that the limiting factor<br>
> seems to be the size of the nozzle. Which begs the question is there<br>
> are any way to change the nozzle size on the fly? If it were possible<br>
> and I do not know how I think it would likely turn the reprap into a<br>
> VERY capable machine.<br>
><br>
> I have been told that the motors are going to take another 11 days to<br>
> arrive. They should be here by the end of the month i reckon. Has<br>
> anyone else had more progress than myself?<br>
><br>
> Kieran.<br>
><br>
> On 8 November 2011 21:56, Blair Thompson <<a href="mailto:mail@justblair.co.uk">mail@justblair.co.uk</a>> wrote:<br>
><br>
> > I have seen other reprap experimenters talking about using enclosures.<br>
> > I for the life of me cant remember whom.  What I do seem to recall<br>
> > was that they were using the heated bed as the main heating source<br>
> > for the enclosure and then using a temperature controlled fan to<br>
> > maintain the ambient temperature inside the case.  I seem to<br>
> > remember a temperature of around 40c as being in the ballpark as to what<br>
was useful.<br>
> ><br>
> > If I remember quickly, what the experimenters were trying to achieve<br>
> > was reduction of distortion in taller models.  Warping occurs<br>
> > sometimes when parts of the model at the base cool while those at<br>
> > the top i.e. the most recently printed are stil hot.  An enclosure<br>
> > serves to reduce the difference in temperature from the most<br>
> > recently printed parts of the model to the least recently printed.<br>
> ><br>
> > I have been trying to perfect my machine and have found that fan<br>
> > cooling of the filament as it is laid down makes a difference to the<br>
> > quality of the prints in either ABS and PLA.  For ABS however I also<br>
> > have to lay a skirt which reduces the cooling at the bottom of the<br>
> > model from either my cooling fan or from the movement of the Y axis.<br>
> > I was getting lifts from the build plate before I started using the<br>
> > skirt.  I don't know if this will improve PLA prints as I have not<br>
> > tried it yet, Imanaged to get good prints without it.<br>
> ><br>
> > The layer thickness you reference for the Reprap of 0.3mm depends on<br>
> > the extrusion nozzle aperture width.  With a 0.5mm width and 3mm<br>
> > filament the layer thickness works out at about 0.4mm using the<br>
> > sfact software as a slicer.  You can get lower by using different<br>
> > filament thickness and different nozzle aperture widths.  What you<br>
> > gain in fidelity you lose in build speeds though.<br>
> ><br>
> > One idea I had was to not build the reprap using triangular<br>
> > vertexes, but rather to build an MDF cube but use the Prusa<br>
> > dimensions and mechanical parts.  This would certainly allow<br>
> > experimentation in terms of retaining some ambient heat around the<br>
models being created.<br>
> ><br>
> > Regards<br>
> ><br>
> > Blair.<br>
> ><br>
> > Ps  I just got a delivery of various screws and bolts that I needed.<br>
> > I of course ordered a few extras.  All but the M8 washers arrived today.<br>
> ><br>
> ><br>
> ><br>
> > -----Original Message-----<br>
> > From: <a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a><br>
> > [mailto:<a href="mailto:members-bounces@electronclub.org">members-bounces@electronclub.org</a>] On Behalf Of Brian Loudon<br>
> > Sent: 08 November 2011 21:29<br>
> > To: Discussion list for the Electron Club<br>
> > Subject: Re: [ELECTRON] Proposed new club + Arduino meet up<br>
> ><br>
> > Hi to those interested in RepRaps, I came across this patent<br>
> > relating to temperature and flow control for professional Fused<br>
> > Deposition Modelling systems ;<br>
> ><br>
> ><br>
> > <a href="http://www.google.co.uk/patents?hl=en&lr=&vid=USPAT5866058&id=OgUXAA" target="_blank">http://www.google.co.uk/patents?hl=en&lr=&vid=USPAT5866058&id=OgUXAA</a><br>
> > AA<br>
> > EBAJ&o<br>
> ><br>
> > i=fnd&dq=stratasys+patent+fused+deposition+modelling&printsec=abstra<br>
> > ct<br>
> > #v=one<br>
> > page&q&f=false<<a href="http://www.google.co.uk/patents?hl=en&lr=&vid=USPAT58" target="_blank">http://www.google.co.uk/patents?hl=en&lr=&vid=USPAT58</a><br>
> > 66<br>
> > 058&id=OgUXAAAAEBAJ&o%0Ai=fnd&dq=stratasys+patent+fused+deposition+m<br>
</div></div>> > od elling&printsec=abstract#v=one%0Apage&q&f=false><br>
<div><div class="h5">> ><br>
> > The stratasys Dimension printers achieve .178 mm, .254 mm or .33 mm<br>
> > layer thicknesses,<br>
> ><br>
> > <a href="http://www.dimensionprinting.com/3d-printers/3d-printing-comparison_" target="_blank">http://www.dimensionprinting.com/3d-printers/3d-printing-comparison_</a><br>
> > ch<br>
> > <a href="http://art.as" target="_blank">art.as</a><br>
> > px<br>
> ><br>
> > the reprap is quoted as a layer thickness of 0.3<br>
> > <a href="http://reprap.org/wiki/Mendel" target="_blank">http://reprap.org/wiki/Mendel</a><br>
> ><br>
> > The patent above emphasises the importance of temperature and the<br>
> > professional machines all have enclosures, makes me wonder if the<br>
> > reprap performance can be optimized?<br>
> ><br>
> > cheers<br>
> ><br>
> > Brian<br>
> ><br>
> ><br>
> ><br>
> > _______________________________________________<br>
> > members mailing list<br>
> > <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> > <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
> ><br>
> > Instructions for changing your mailing list settings:<br>
> > <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
> ><br>
> > Archive for this list:<br>
> > <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
> ><br>
> ><br>
> > _______________________________________________<br>
> > members mailing list<br>
> > <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> > <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
> ><br>
> > Instructions for changing your mailing list settings:<br>
> > <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
> ><br>
> > Archive for this list:<br>
> > <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
> ><br>
> -------------- next part -------------- An HTML attachment was<br>
> scrubbed...<br>
> URL:<br>
> <<br>
> <a href="http://lists.electronclub.org/pipermail/members/attachments/20111108/d" target="_blank">http://lists.electronclub.org/pipermail/members/attachments/20111108/d</a><br>
> 4d08a<br>
> ec/attachment.htm><br>
> _______________________________________________<br>
> members mailing list<br>
> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
><br>
> Instructions for changing your mailing list settings:<br>
> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
><br>
> Archive for this list:<br>
> <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
><br>
><br>
> _______________________________________________<br>
> members mailing list<br>
> <a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
> <a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
><br>
> Instructions for changing your mailing list settings:<br>
> <a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
><br>
> Archive for this list:<br>
> <a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL:<br>
</div></div><<a href="http://lists.electronclub.org/pipermail/members/attachments/20111109/9dc96b
b7/attachment.htm" target="_blank">http://lists.electronclub.org/pipermail/members/attachments/20111109/9dc96b<br>
b7/attachment.htm</a>><br>
<div class="HOEnZb"><div class="h5">_______________________________________________<br>
members mailing list<br>
<a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
<a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
<br>
Instructions for changing your mailing list settings:<br>
<a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
<br>
Archive for this list:<br>
<a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
<br>
<br>
_______________________________________________<br>
members mailing list<br>
<a href="mailto:members@electronclub.org">members@electronclub.org</a><br>
<a href="http://lists.electronclub.org/cgi-bin/mailman/listinfo/members" target="_blank">http://lists.electronclub.org/cgi-bin/mailman/listinfo/members</a><br>
<br>
Instructions for changing your mailing list settings:<br>
<a href="http://lists.electronclub.org/emailhowto.html" target="_blank">http://lists.electronclub.org/emailhowto.html</a><br>
<br>
Archive for this list:<br>
<a href="http://lists.electronclub.org/pipermail/members/" target="_blank">http://lists.electronclub.org/pipermail/members/</a><br>
</div></div></blockquote></div><br></div>